BG大游

标准光 ?

标准协议光 ?

兼容协议光 ?

其它种类光器件

手艺支持

QSFP+ SR4

QSFP+ SR4

0.0/5 rating (0 votes)

Description

QSFP+ SR4

Features

¨ 4 channels full-duplex transceiver modules            

¨ Transmission data rate up to 10.5Gbps per channel  

¨ 4 channels 850nm VCSEL array

¨ 4 channels PIN photo detector array

¨ Low power consumption <1.5W

¨ Hot Pluggable QSFP form factor

¨ Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF

¨ Single MPO connector receptacle

¨ 3.3V power supply voltage

¨ RoHS 6 compliant(lead free)

¨ Case operating temperature

   Commercial:0 ~ +70

          Industrial:-40 ~ +85

Applications

¨ 40G Ethernet and OTU3

¨ Datacom/Telecom switch & router connections

¨ Data Aggregation and Backplane Applications

¨ Proprietary Protocol and Density Applications

¨ Infiniband transmission at 4ch SDR, DDR and QDR

Description

The F-tone Networks Technologies FTCQ-4X-SR4xx is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber.

These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

 

Ordering information

Part Number

Product Description

FTCQ-4X-SR4

QSFP+ SR4, 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF,0 ~ +70

FTCQ-4X-SR4I

QSFP+ SR4, 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF,-40 ~ +85

 

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

网站地图网站地图