Description
可调准直器
透镜调理准直器(焦距2.7-20 mm)
此规格准直器设计可对透镜与光纤端面间距举行调理(即物距可调),可使准直器输出光束准直、发散或汇聚状态,单透镜或透镜组相关于准直器外壳通过调理扳手举行滑动调理。焦距规模2.7至20 mm,光束直径0.5至3.6 mm(高斯强度漫衍1/e2),可凭证要求加工无磁性钛合金外壳。准直器前端兼容5M系列聚焦器或5PF系列偏振器。透镜两侧都有AR膜,分为-A、-B与-C型,笼罩可见光至近红外波段。
光纤调理准直器(焦距20-200 mm)
区别于透镜调理准直器,光纤调理准直器是通过调理光纤发光端面距离透镜的相对位置举行物距调理,接纳调焦环结构设计,光纤的空间方位(即准直光束的偏振主轴PSP)无旋转。通过调焦环可对输出光束准直、发散或汇聚状态举行大规模调解。焦距规模20至200 mm,光束直径3.6至36 mm(高斯强度漫衍1/e2),光纤输入一侧可集成光学元件,可凭证要求加工无磁性钛合金外壳。光接口可为FC/PC、FC/APC、SMA。透镜两侧都有AR膜,分为-A、-B与-C型,笼罩可见光至近红外波段。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.